Small mixers often load several tons of cement to shuttle around various construction sites, bearing the heavy responsibility of transporting construction houses. The working environment is not harsh, so it is more necessary to maintain and maintain than ordinary motor vehicles, so as to maintain a good vehicle condition. Therefore, the following suggestions are put forward for the maintenance of small mixers today for your reference.
The maintenance of small mixers when they are newly purchased is called commissioning maintenance in the industry, that is, the commissioning before the small mixers are put into service. Although the quality supervision department will carry out product quality inspection before the small mixers leave the factory, and they will enter the market only when all indicators are qualified, but due to the storage time and environment before they are sold, the mixers may have some small defects in performance, At this time, it is necessary to improve according to the test run results.
Generally, the maintenance of small mixer truck after the test run mainly includes the maintenance of lubrication system, the debugging of bolts, the adjustment of drive belt, and the fastening of valves and connectors.
Secondly, the small mixing truck shall be maintained in different seasons according to the different needs of the use season. The seasonal maintenance mainly refers to the maintenance in summer and winter under two extreme weather conditions. The purpose of the maintenance is to adapt the vehicle to environmental changes to meet the use requirements.
The main work of seasonal maintenance is to replace lubricating oil, fuel and antifreeze. For the high and cold areas with large differences in winter and summer, the antifreeze should be replaced in time in winter to ensure that the vehicle is in good working condition and prevent danger during use.
Maintenance of small mixer in case of failure or major traffic accident. In this case, the maintenance can be handled differently according to the status and severity of the accident. When there is no major damage, the vehicle can be put back on the road after simple corresponding maintenance. When there is serious damage to the engine or vehicle chassis, the vehicle must be inspected, the damaged parts must be replaced and inspected before it can be restarted for use. Come to our website for more relevant matters http://www.zkzsljbc.com Ask about it!