自上料搅拌车的根本结构主要包含取力器、搅拌筒前后支架、减速机、液压系统、操作组织、清洗系统等。下面小编就来详细的介绍一下。

The basic structure of self-feeding mixing truck mainly includes power take-off, front and rear support of mixing drum, reducer, hydraulic system, operation organization, cleaning system, etc. Let's introduce it in detail.

1、取力设备

1. Power take-off equipment

自上料搅拌车选用主车建议机取力办法。取力设备的作用是通过操作取力开关将建议机动力取出，经液压系统驱动搅拌筒，搅抖筒在进料和运送过程中正向旋转，以利于进料和对混凝土进行搅拌，在出料时反向旋转，在作业结束后堵截与建议机的动力联接。

The main truck is recommended for the self-feeding mixer truck. The function of the power take-off equipment is to take out the power of the proposed machine by operating the power take-off switch, and drive the mixing drum through the hydraulic system. The mixing drum rotates in a positive direction during the feeding and transportation process, so as to facilitate the feeding and mixing of concrete, and rotates in a reverse direction during the discharging, and blocks the power connection with the proposed machine after the operation.

2、液压系统

2. Hydraulic system

将经取力器取出的建议机动力(一般都是后置全功能取力器)，转化为液压能(排量和压力)，再经马达输出为机械能（转速和扭矩），为搅拌筒转动供给动力。

The recommended machine power taken out by the power take-off (generally the rear full-function power take-off) is converted into hydraulic energy (displacement and pressure), and then output into mechanical energy (speed and torque) through the motor to provide power for the rotation of the mixing drum.

3、减速机

3. Reducer

将液压系统中马达输出的转速减速后，传给自上料搅拌车搅拌筒。

Reduce the speed output by the motor in the hydraulic system and then transmit it to the mixing drum of the self-feeding mixer.

4、操作组织

4. Operation organization

1）控制搅拌筒旋转方向，使之在进料和运送过程中正向旋转，出料时反向旋转。

1) Control the rotation direction of the mixing drum to make it rotate in a positive direction during feeding and transportation, and rotate in a reverse direction during discharging.

2）控制搅拌筒的转速。

2) Control the speed of mixing drum.

5、清洗系统

5. Cleaning system

清洗系统的首要作用是清洗搅拌筒，有时也用于运送途中进行干料搅拌。清洗系统还对液压系统起冷却作用。

The primary function of the cleaning system is to clean the mixing drum, and sometimes it is also used for dry material mixing during transportation. The cleaning system also cools the hydraulic system.

6、封闭设备

6. Enclosed equipment

全封闭设备选用反转密封技能，密封了搅拌车的进出料口，处理了传统搅拌车水份蒸发、砂浆分层、砼料撒落、行车等系列问题。

The fully enclosed equipment adopts the reverse sealing technology, which seals the inlet and outlet of the mixer truck, and solves a series of problems such as water evaporation of the traditional mixer truck, mortar layering, concrete scattering, and driving safety.

自上料搅拌车的6个根本结构分析就到这里了，您在平常使用中要定期对其进行检查维护，延长其使用寿命。更多相关事项就来我们网站http://www.zkzsljbc.com咨询！

Since the analysis of the six basic structures of the loading mixer truck has come to an end, you should regularly check and maintain it in normal use to extend its service life. Come to our website for more relevant matters http://www.zkzsljbc.com consulting service