小型搅拌车卸料环节其实对于工程的建设进程是很重要的，卸料慢的话会浪费很多的时间，当然使用正确的操作就会让人员，让卸料过程加快，下面来讲讲小型搅拌车驾驶进工地及卸料后的事项。

In fact, the unloading link of the small mixer is very important for the construction process of the project. Slow unloading will waste a lot of time. Of course, the correct operation will make personnel safe and speed up the unloading process. Next, we will talk about the driving of the small mixer into the construction site and the matters after unloading.

进工地

Entering the construction site

进工地时尽量走路中间，因工地道路简易，路基松软，靠近路边行车容易导致车辆侧翻。

When entering the construction site, try to walk in the middle. Because the road on the construction site is simple and the subgrade is soft, driving near the roadside is easy to cause vehicle rollover.

提前下车查看倒车线路。搅拌车晚上工作，到工地后，将车停好，先下车查看倒车路线，有障碍物、有坑或者比较松软的地方，都要避让，遇到钢筋钉子之类的及时清理。

Get out of the car in advance to check the reversing route. The mixer truck works at night. After arriving at the construction site, park the truck and get off to check the reversing route. If there are obstacles, pits or soft places, avoid them. In case of reinforcement nails, clean them in time.

在倒车的时候一定要慢。因工地好多路面是挖掘机刚刚铺的比较软，车容易陷。

Be slow when reversing. Because many roads on the construction site are just paved by excavators, which is relatively soft, the car is easy to sink.

用1档起步(这时候可以把罐子停下，一档大油门时罐子会转得很快，车子会更不稳定)，缓慢而匀速的行驶。倒车路线尽量直线，若要反复倒车时，方向盘不要打死或打太过，因为在松软路面容易憋熄火，轰大油门倒出时，车速过快，容易撞到东西。

Start with the first gear (you can stop the tank at this time, the tank will rotate very fast when the first gear is full throttle, and the car will be more unstable), and drive slowly and at a constant speed. The reversing route should be as straight as possible. If you want to reverse repeatedly, the steering wheel should not be killed or turned too far, because it is easy to hold the engine off on soft roads. When the accelerator is turned up, the vehicle speed is too fast and it is easy to hit things.

卸料中

Unloading

卸料前让搅拌罐全速运转搅拌一两分钟，让混凝土充分搅拌，必要时可以加一些水，让混凝土搅拌得更均匀，也方便卸料。卸料不要大意和放料工确定好关系，放料时好自己看着，免得放料工乱操作放料操作杆。每次罐子正反转中间位子时好停一下，保护减速机、泵马达等。

Before unloading, let the mixing tank run at full speed and mix for a minute or two to fully mix the concrete. If necessary, add some water to make the concrete mix more evenly and facilitate unloading. Don't carelessly determine a good relationship with the placer when discharging materials, and watch yourself when discharging materials, so as to prevent the placer from randomly operating the discharging lever. Stop every time the tank is in the middle of the forward and reverse direction to protect the reducer, pump motor, etc.

搅拌罐一定要仔细冲洗干净，洗罐子时一定要仔细冲洗干净，并把水反复正反转两次，再放出来。别忘了施工单位签字，把到工地时间和自己的大名签上，别忘了施工单位签字，否则白干了。

The mixing tank must be carefully washed. When washing the tank, it must be carefully washed. The water must be reversed twice and then released. Don't forget the signature of the construction unit. Sign the time of arrival at the construction site and your name. Don't forget the signature of the construction unit, or you will work for nothing.

小型搅拌车驾驶进工地及卸料后的正确操作就讲解到这里了，您对此有什么疑惑或者对搅拌车有需求，欢迎随时来我们网站http://www.zkzsljbc.com进行联系咨询了解！

The correct operation of the small mixer after driving into the construction site and unloading will be explained here. If you have any doubts or needs for the mixer, please come to our website at any time http://www.zkzsljbc.com Contact and inquire!