全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 常见问题 >

常见问题

上料搅拌车减震器漏油的原因

作者:http://www.zkzsljbc.com 时间:2022-09-30

只要驾驶过自动上料搅拌车的老司机应该都懂得,自动上料搅拌车操作不当会引起漏油,而漏油常见的就是减震器出现了问题,下面厂家就来为您讲讲上料搅拌车减震器漏油的原因。
As long as the old driver who has driven the automatic feeding mixer knows, improper operation of the automatic feeding mixer will cause oil leakage, and the common problem of oil leakage is that the shock absorber has problems. The following manufacturer will tell you about the causes of oil leakage of the shock absorber of the feeding mixer.
一:在驾驶的过程中很少去检查保养,施工完后没有及时清洁,时间久了各种残留物铁屑等会增加油封损坏;
1: During the driving process, they seldom go for inspection and maintenance. After construction, they are not cleaned in time. Over time, various residues such as iron filings will increase the damage of the oil seal;
二:施工的时候场地比较复杂,施工超负荷等,比如水泥沙子进入油封没有及时清理;
2: During construction, the site was quite complex and the construction was overloaded. For example, cement and sand entered the oil seal and were not cleaned in time;
自动上料搅拌车
三:自动上料搅拌车驾驶的时间比较久,减震器一直油封一直没有更换或者保养过,时间长了会老化,密封功能减低。
3: The automatic feeding mixer has been driving for a long time. The oil seal of the shock absorber has not been replaced or maintained. It will age and the sealing function will be reduced after a long time.
四:生产厂家在喷底盘装甲的时候,减震器没有密封好或者处理不好,装甲在减震器活塞杆上会造成油封磨损带来的漏油,所以,在选购自动上料搅拌车的时候要看好厂家;
4: When the manufacturer sprays chassis armor, the shock absorber is not properly sealed or handled. The armor on the piston rod of the shock absorber will cause oil leakage due to oil seal wear. Therefore, the manufacturer should be careful when purchasing automatic feeding mixer;
五:驾驶的过程中,经常检查活塞运动的支杆是否严密,如果密封不严,也会漏油。
5: During driving, always check whether the supporting rod of the piston movement is tight. If the sealing is not tight, oil will leak.
一般是这六大原因,只要懂得,平时都会自行检修,也会注重保养。更多注意事项就来我们网站http://www.zkzsljbc.com进行咨询吧,有关人员为您服务!
Generally, these six reasons are the main reasons. As long as you understand them, you will always carry out self maintenance and pay attention to maintenance. More notes on our website http://www.zkzsljbc.com Please consult and the relevant personnel will serve you!
新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码