全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 常见问题

常见问题

小型搅拌车零件磨损处理要注意什么?

作者:http://www.zkzsljbc.com 时间:2022-04-04

  任何机械设备都会在使用中出现零件的磨损,这是常事,那么我们要做的就是出现问题时要及时进行处理,防止更大的磨损出现,那么小型搅拌车零件磨损处理要注意什么?
  Any mechanical equipment will wear parts in use, which is common, so what we need to do is to deal with problems in time to prevent greater wear, so what should be paid attention to in the wear treatment of small mixing truck parts?
  小型搅拌车的设备部件保持合理的温度。在运行中,每个部件的温度都有自己的正常范围。温度过高或过低都会影响零件的强度,所以有必要用冷却液和润滑油控制某些零件的温度,使其工作在合理的温度范围内。
  The equipment parts of the small mixer are kept at a reasonable temperature. During operation, each component has its own normal temperature range. Too high or too low temperature will affect the strength of parts, so it is necessary to control the temperature of some parts with coolant and lubricating oil, so that they work within a reasonable temperature range.
  及时清洗,减少机械杂质对设备的影响。机械杂质一般是指工程机械在使用过程中产生的灰尘、泥土等物质和一些金属屑、油脂等。一旦这些杂质到达机器的工作面之间,危害是非常大的:不仅摩擦会增加,而且油耗也会增加。并且会破坏润滑油膜,划伤配合面。
  Timely cleaning, reduce the impact of mechanical impurities on equipment. Mechanical impurities generally refer to dust, soil and other substances and some metal chips, grease and so on generated during the use of construction machinery. Once these impurities get between the working surfaces of the machine, they can be very harmful: not only will friction increase, but fuel consumption will also increase. And will destroy the lubricating oil film, scratch the mating surface.
  防止小型搅拌车零件腐蚀。腐蚀作用于零件,有时不易被发现,易被忽视,危害更大。雨水、空气中的化学物质等通过机械零件的管道和缝隙渗入机械,腐蚀零件。腐蚀零件的继续工作也会加速机械磨损并增加机械故障。这就要求管理人员和操作人员根据当时当地的天气情况和现场情况,采取合理的施工安排,将化学腐蚀对机械零件的危害降到。
  Prevent corrosion of small agitator parts. Corrosion on parts, sometimes not easy to be found, easy to be ignored, more harm. Rainwater, chemicals in the air and so on penetrate the machinery through the pipes and cracks of the machinery parts, corroding the parts. Continued operation of corroded parts can also accelerate mechanical wear and increase mechanical failure. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions, to minimize the harm of chemical corrosion on mechanical parts.
  很多机械设备在故障之初都是由零件磨损引起的,小型搅拌车在运行过程中也是如此。因此,在使用过程中减少了设备部件的磨损,有效避免了机械设备在使用过程中的故障。更多内容就来www.zkzsljbc.com咨询吧。
  Many mechanical equipment at the beginning of the failure is caused by the wear of parts, small mixer in the process of operation is the same. Therefore, in the process of use to reduce the wear of equipment parts, effectively avoid the mechanical equipment in the process of use. For more information, visit www.zkzsljbc.com.
新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码