全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 常见问题 >

常见问题

自上料搅拌车基础知识合集你都懂吗?

作者:http://www.zkzsljbc.com 时间:2021-09-10

路面机械知多少
What do you know about pavement machinery
其实不管是什么设备,如果想要延长其使用寿命,比较好的办法就是掌握一些保养方法,当然了自上料搅拌车也不例外。
In fact, no matter what equipment it is, if you want to prolong its service life, a better way is to master some maintenance methods. Of course, the self loading mixer is no exception.
自上料搅拌车小知识合集,肯定有你不知道的
There must be something you don't know
自上料搅拌车的保养方法:
Maintenance method of self loading mixer:
液压驱动系统:液压系统是搅拌车的核心系统,为保障搅拌车能正常工作,需要在每次自上料搅拌车发动前检查油路散热器和减速机的液压油位,保障油位指示在视窗范围内,同时要保障其清洁性,以免尘粒和水分等污染系统液压油,造成系统不能正常工作或损坏。
Hydraulic drive system: the hydraulic system is the core system of the mixer truck. In order to ensure the normal operation of the mixer truck, it is necessary to check the hydraulic oil level of the oil circuit radiator and reducer before starting the self loading mixer truck every time, ensure that the oil level indication is within the window range, and ensure its cleanliness to prevent dust and moisture from polluting the hydraulic oil of the system, The system cannot work normally or is damaged.
自上料搅拌车
塑料搅拌车的使用注意事项:
Precautions for use of plastic mixer:
(1)液压系统压力应符合使用说明书中的规定,不得随意调整,液压油的油质和油量应符合原定要求。
(1) The pressure of the hydraulic system shall comply with the provisions in the operation manual and shall not be adjusted at will. The oil quality and quantity of the hydraulic oil shall meet the original requirements.
(2)自上料搅拌车装料前,应先排净拌筒内残存的积水和杂物,在运输过程中要不停地转动,以防混凝土离析。搅拌车到达工地和卸料之前,应先使拌筒全速以14—18转/分转动1—2分钟,然后再进行反转卸料,反转之前,应使搅拌筒停稳不转。
(2) Before loading from the loading mixer truck, the residual ponding and sundries in the mixing drum shall be drained first, and it shall be rotated continuously during transportation to prevent concrete segregation. Before the mixer truck arrives at the construction site and unloading, first rotate the mixing drum at full speed at 14-18 rpm for 1-2 minutes, and then reverse unloading. Before reversing, stop the mixing drum stably.
新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码

微信号:1234567

点击微信号复制,添加好友

 打开微信