全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 常见问题 >

常见问题

移动式自上料搅拌车的操作方式你用对了吗?

作者:http://www.zkzsljbc.com 时间:2021-04-29

一、开启前应该对机械系统各部位仔细做好查验,确定良好后才可开启。
1、 Before opening, all parts of the mechanical system should be carefully checked, and can be opened only after they are confirmed to be in good condition.
二、开启前,应将搅拌操纵杆放到“空档”部位。
2、 Before opening, put the mixing control lever in the "neutral" position.
三、开启后,应将搅拌操纵杆放到“卸料”部位,放去筒内积水。
3、 After opening, the mixing control rod should be placed at the "discharge" position to remove the water in the cylinder.
四、装料时,搅拌操作杆应放到“装料”部位。
4、 When loading, the mixing operating rod should be placed at the "loading" position.
五、运送前,卸料槽必需稳定在“行驶”部位,避免 摆动。
5、 Before transportation, the discharge chute must be stable in the "driving" position to avoid swing.
自上料搅拌车
六、操作操纵杆时,应在“空档”部位稍作滞留后才可动至下一个部位。
6、 When operating the control lever, it should be slightly detained in the "neutral" position before moving to the next position.
七、做好文明施工,桶内多出材料禁止随意乱倒。卸料后必需对搅拌筒、料槽、托辊等部位做好清理。
7、 Do a good job in civilized construction, and don't pour materials randomly. After discharging, the mixing drum, material trough, idler and other parts must be cleaned.
八、人进到筒内清除砼结块时,应将车子熄火,拔掉电门钥匙,筒外设人监测。
8、 When people enter the cylinder to remove concrete lumps, they should turn off the car, pull out the key of the switch, and set people outside the cylinder to monitor.
新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码

微信号:1234567

点击微信号复制,添加好友

 打开微信