自上料搅拌车厂家

全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 常见问题 >

常见问题

全自动搅拌车的保养需要注意什么?

作者:http://www.zkzsljbc.com 时间:2021-04-25

在使用全自动搅拌车的过程中,如果要改善设备的操作和使用并保持设备的良好性能,则需要对搅拌机进行适当的维护。但是,在维护过程中有一些注意事项。让我们轻松地理解它。
In the process of using the automatic mixer, if you want to improve the operation and use of the equipment and maintain the good performance of the equipment, you need to maintain the mixer properly. However, there are some precautions in the maintenance process. Let's understand it easily.
1.清洁机器时,只能擦拭电箱,不能冲洗电箱。
1. When cleaning the machine, only wipe the electric box, not wash it.
2.要调节主轴密封圈密封套,有必要将泵芯和供油支架分开,然后拧紧三颗螺钉。拧紧螺钉后的标准配置:用8英寸可动手轻松拉动主轴的螺钉。
2. To adjust the sealing sleeve of the main shaft sealing ring, it is necessary to separate the pump core from the oil supply bracket, and then tighten the three screws. Standard configuration after screw tightening: 8-inch screw that can easily pull the spindle by hand.
3.在施工现场移动机器时,无论距离多远,都必须先拔掉电源线。
3. When moving the machine at the construction site, no matter how far the distance is, the power cord must be removed first.
全自动搅拌车
4.机器运行时,必须关闭并锁上电箱门,以防止灰尘和湿气进入并损坏机器组件。
4. When the machine is running, the electric box door must be closed and locked to prevent dust and moisture from entering and damaging the machine components.
5.轴承座应在工作前后每天加油,并应经常检查变速箱油。
5. The bearing seat should be refueled every day before and after work, and the gearbox oil should be checked frequently.
6.每次清洁泵芯时,都需要添加少量硅油以防止润滑和刺穿。目的是防止转子铁芯生锈,并在下次顺利启动。
6. Every time the pump core is cleaned, a small amount of silicone oil should be added to prevent lubrication and puncture. The purpose is to prevent the rotor core from rusting and start up smoothly next time.
由于全自动搅拌车采用全液压技术,因此有必要考虑液压预见的质量,以了解所有液压技术是否先进。由于该动力来自发动机,因此除了发动机的性能和质量外,还必须考虑汽车底盘的性能,承载能力和质量。为了严格执行维护,必须严格按照正确的操作流程进行车辆设备维护。
Because the full-automatic mixer adopts full hydraulic technology, it is necessary to consider the quality of hydraulic technology to know whether all hydraulic technology is advanced. As the power comes from the engine, in addition to the performance and quality of the engine, the performance, bearing capacity and quality of the chassis must also be considered. In order to strictly carry out the maintenance, the vehicle equipment maintenance must be carried out in strict accordance with the correct operation process.
上一篇:自动上料搅拌车高温产生的高噪音怎么解决?
下一篇:移动式自上料搅拌车的操作方式你用对了吗?

TAG:自上料搅拌车,自动上料搅拌车, 全自动搅拌车,小型搅拌车

新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码

微信号:1234567

点击微信号复制,添加好友

 打开微信