1. The water in the car washing water tank is not enough to remove. Fill the car wash tank with water.
2. If the air inlet of the straw is blocked or blocked, check and tighten the straw. Don't breathe air.
3. The liquid level of the oil tank is too low, and the air in the oil is sucked into the pump. If this happens, you can add hydraulic oil with the same label.
4. If the mounting bracket of the pump is not firm enough, vibration and noise will be generated during operation. In this case, the oil pump bracket can be reinforced.
5. Blocked filter element will make oil absorption difficult or insufficient. In this case, clean the filter element or replace the filter element.
6. The oil cooling fan is not turned on. Remove: turn on the cooling fan.
7. if the hydraulic oil does not meet the requirements or the oil is too sticky, replace the low viscosity hydraulic oil meeting the label requirements.
8. There is hard concrete in the tank. If this happens, clean up and shovel in time.
9. The connection angle between the input cardan shaft and the connection angle between the cardan shaft and the power take-off are too large. If it is loosened, noise will be generated. In this case, please check and tighten it within time.
This article is a wonderful content provided by the automatic feeding mixer for you today. For more wonderful content, please click to enter the website http://www.zkzsljbc.com
To view, more wonderful content can click on the relevant page to view