自上料搅拌车厂家

全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 常见问题 >

常见问题

小型混凝土搅拌车的漆面保养有哪些?

作者:http://www.zkzsljbc.com 时间:2021-03-08

1、漆面氧化。小型混凝土搅拌车在太阳紫外线的照射下,漆膜会不断向空气中蒸发油份以达到保护自身的作用,长时间就会导致漆面油分的过分散失。漆面的亮度、深度都大打折扣,使漆面慢慢发白,形成氧化层,缩短了车漆的寿命,肉眼就可观察到车漆发乌、发白、无光泽等现象。氧化严重的话可以通过研磨和抛光来处理。
1. The paint surface is oxidized. Under the ultraviolet radiation of the sun, the paint film of small concrete mixer will continuously evaporate oil into the air to protect itself, which will lead to excessive loss of paint oil for a long time. The brightness and depth of the paint surface are greatly reduced, which makes the paint surface turn white slowly, forms an oxide layer, shortens the service life of the car paint, and the phenomenon of blackening, whitening and tarnishing of the car paint can be observed by the naked eye. Serious oxidation can be treated by grinding and polishing.
2、交通膜。小型混凝土搅拌车在行驶过程中由于摩擦而产生强烈的静电层,静电对灰尘、油污和化学粉尘吸附能力很强,时间长了会形成一层坚硬的交通膜,这种“交通膜”极易使漆面发生氧化腐蚀,这种情况可采用研磨抛光处理
2. Traffic film. Small concrete mixer produces strong static electricity layer due to friction during driving. Static electricity has strong adsorption capacity for dust, oil and chemical dust. After a long time, it will form a hard traffic film. This kind of "traffic film" is very easy to cause oxidation and corrosion on the paint surface. In this case, grinding and polishing can be used
自上料搅拌车
3、龟裂。如果平时不对漆面作护理,金属漆可能产生一种非常细微的裂痕,它会不断地渗透车漆,直至穿透整个色漆层,这种现象就叫“龟裂”。有时因为重喷漆质量的问题,也会产生龟裂。如果裂纹中有车蜡,会发现车身有条纹状的龟裂现象。经常打蜡可逐渐减少龟裂的产生。
3. Crack. If you don't take care of the paint surface at ordinary times, there may be a very slight crack in the metallic paint, which will continuously penetrate the car paint until it penetrates the whole paint layer. This phenomenon is called "cracking". Sometimes because of the quality problem of heavy painting, it will also produce cracks. If there is car wax in the crack, it will be found that the body has striated cracks. Regular waxing can gradually reduce cracking.
4、褪色。大气中的油烟和污染物是造成车漆变色、褪色的主要原因。褪色与氧化不同,发生褪色时,车漆会出现不均匀的色差。中、轻度的褪色可用研磨、抛光治理,严重时必须重新喷漆。
4. Discoloration. Fumes and pollutants in the atmosphere are the main causes of discoloration and fading of car paint. Discoloration is different from oxidation. When discoloration occurs, the paint will have uneven color difference. Moderate and mild discoloration can be treated by grinding and polishing. If it is serious, it must be repainted.
5、蚀痕。蚀痕是面状磨蚀。昆虫、鸟粪、树汁、焦油、沥青都有可能引起的蚀痕。轻微的蚀痕可用研磨抛光解决。
5. Erosion marks. The erosion mark is a surface erosion. Insects, bird droppings, tree sap, tar and asphalt may cause erosion marks. Slight erosion can be solved by grinding and polishing.
6、水痕纹。水痕纹是水滴蒸发后留下的痕迹,呈环状。氧化、常用洗涤灵清洗的车容易染上水痕。轻微水痕纹的通过打蜡抛光可治愈,严重时需研磨或喷漆。
6. Water marks. Water marks are the marks left by the evaporation of water droplets, which are in a ring shape. Oxidation, commonly used detergent cleaning car easily stained with water marks. Slight water marks can be cured by waxing and polishing. In severe cases, grinding or painting is required.
7、浅划痕。由于摩擦及日常护理不当,小型混凝土搅拌车车漆面出现轻微的划痕,但并未露出底漆,这种划痕在阳光下比较明显。一般采用专业的抛光方法去除。
7. Light scratches. Due to improper friction and daily care, the paint surface of small concrete mixer truck has slight scratch, but the primer is not exposed, which is obvious in the sun. It is usually removed by professional polishing method.
今天是小编给大家介绍的自上料搅拌车内容,更多的精彩内容请详细的关注我们的网站:http://www.zkzsljbc.com,后续内容我们会定期的进行更新!
Today is the content of self loading mixer introduced by Xiaobian. Please pay more attention to our website: http://www.zkzsljbc.com We will update the follow-up content regularly!
上一篇:自上料搅拌车机场水泥混凝土道面施工
下一篇:自动上料搅拌车优势在哪些方面独特?

TAG:自上料搅拌车,自动上料搅拌车, 全自动搅拌车,小型搅拌车

新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码

微信号:1234567

点击微信号复制,添加好友

 打开微信