小型搅拌车运输混凝土的方式一般是根据运输距离的远近，施工条件和对混凝土的配比及质量的要求来定的。

The mode of transporting concrete by small mixers is generally determined according to the distance of transportation, construction conditions and requirements for the proportion and quality of concrete.

可以运输预拌的混凝土，就是已经搅拌好的混凝土，这种运输方式一般路程不会太远，搅拌车从搅拌站装好混凝土，在行驶过程中搅拌罐以2r/min左右的转速进行转动，以保证混凝土不会出现凝结，离析的现象，同时也能保证混凝土的质量。

The ready-mixed concrete can be transported, that is, the concrete that has been mixed. This transportation method is generally not too far away. The mixer truck loads the concrete from the mixing station, and the mixing tank rotates at a speed of about 2 r/min during the driving process to ensure that the concrete will not coagulate and segregate, and also ensure the quality of the concrete.

其次可以运输合料运输，这个合料运输主要是指湿料和干料的运输。

Secondly, we can transport mixed materials, which mainly refers to the transportation of wet materials and dry materials.

湿料运输：搅拌站将水泥、砂石骨料、水等按科学的配比同时装入搅拌车的搅拌罐，在运输的过程中搅拌罐会以10r/min左右的转速转动，让混凝土在车辆的行驶过程中充分搅拌均匀，到达建筑工地后，混凝土基本上就搅拌好了。

Wet material transportation: the mixing station will load the cement, gravel aggregate, water, etc. into the mixing tank of the mixing truck at the same time according to the scientific proportion. During the transportation, the mixing tank will rotate at a speed of about 10r/min, so that the concrete can be fully mixed evenly during the driving process of the vehicle. After arriving at the construction site, the concrete is basically mixed.

干料运输：这种运输方式就是在搅拌站按混凝土按配比向搅拌罐内加入水泥、砂石等干料，再向搅拌车的压力水箱中加入搅拌用水，然后在搅拌车的行驶过程中适当的搅拌罐内喷水进行搅拌，还可以根据建筑工地的要求运输干料到现场后再注水进行搅拌。

Dry material transportation: This transportation method is to add cement, sand and other dry materials into the mixing tank according to the proportion of concrete in the mixing station, then add mixing water into the pressure tank of the mixing truck, and then spray water into the mixing tank during the driving process of the mixing truck for mixing, or transport dry materials to the site according to the requirements of the construction site and then inject water for mixing.

能够延长混凝土的输送距离，尤其是混凝土干料注水的方式可以将混凝土运输到很远的地方；湿料搅拌运输可以节约搅拌设备投资，这样就相对的提高了生产效率。

It can extend the delivery distance of concrete, especially the concrete can be transported to far places by means of water injection with dry materials; The wet material mixing and transportation can save the investment of mixing equipment, thus relatively improving the production efficiency.

搅拌车不论是用什么样的运输方式都是有利也有弊的，这主要还是根据实际情况来定运输方式，合适的运输方式重要。您有什么问题就来我们网站http://www.zkzsljbc.com进行咨询吧！

No matter what kind of transportation mode the mixer uses, there are both advantages and disadvantages. This is mainly determined according to the actual situation. The appropriate transportation mode is important. Come to our website if you have any questions http://www.zkzsljbc.com Consult!