In order to improve the reliability of the braking system of the automatic feeding mixer truck, it is recommended to improve the following parts of the braking system of the automatic feeding mixer truck:,

（1）自动上料搅拌车制动气压管路由单管路变为双管路，以提高系数。,

(1) The brake air pressure pipe of automatic feeding mixer truck is changed from single pipe to double pipe to improve the safety factor.,

（2）增加空压机到组合阀的铁管长度，采用多个U形排列，以增强输出空气的冷却效果，装载机减轻组合阀橡胶密封件的老化。

(2) Increase the length of the iron pipe from the air compressor to the combination valve, and adopt multiple U-shaped arrangement to enhance the cooling effect of the output air, and the loader reduces the aging of the rubber seal of the combination valve.

（3）采用带干燥器的调压器替换现在使用的组合阀，自动上料搅拌车损坏后的维修策略以减少储气罐的积水。

(3) The pressure regulator with dryer is used to replace the combination valve currently used, and the maintenance strategy after the automatic feeding mixer is damaged is adopted to reduce the ponding in the air storage tank.

（4）自动上料搅拌车在气顶油制动系统中，加力器是非常关键的部件，对其储液罐应加装报警装置。可以采用以下两种结构：采用液位报警，使用浮子和舌簧开关以检测制动液液面的高低，适时报警；采用行程报警，若加力器活塞行程太大，说明制动系统有故障。,

(4) In the air top oil braking system of automatic feeding mixer truck, the booster is a very key component, and the liquid storage tank shall be equipped with an alarm device. The following two structures can be adopted: liquid level alarm, float and tongue spring switch to detect the level of brake fluid and alarm in time; travel alarm. If the stroke of booster piston is too large, it indicates that the braking system is faulty. ,

（5）采用带干燥器的调压器替换现在使用的组合阀，以减少储气罐的积水。

(5) The pressure regulator with dryer is used to replace the combination valve now in use to reduce the water accumulation in the air tank.

我们一直在坚持分享的路上自上料搅拌车厂家http://www.zkzsljbc.com真正为您您所需要的问题.

We have been insisting on sharing on the road from the charging mixer manufacturer http://www.zkzsljbc.com Truly solve the problems you need