Most of the time, since the loading mixer is transported to the urban construction site, the concrete will leak along the way because of road conditions, driving speed, vehicles and other reasons. In this case, it is necessary to deal with it in a timely manner, so what to do?
Drips and leaks from the loading mixer are mainly caused by the concrete mixer being filled with brakes, traffic lights, bumps and other reasons in transportation. Some cement slurry will drip down the tank truck funnel and pollute the road.
Gray cement mud formation cement bumps “inlaid” in the asphalt pavement, not only affect the road capacity road appearance, and cement bumps are very stubborn, it is difficult to remove, once not cleaned up in time, will “long” on the road become barricades, the formation of safety hazards.
Enterprises can install leak-proof box on the stirring truck to prevent dripping. The leak-proof box is not big, just under the unloading port of the concrete mixing truck. The upper mouth of the leak-proof box is the size of the washbasin, and the lower mouth can be switched.
Whenever the concrete spills out of the discharge port during the turbulence of the vehicle, the small box can catch the spilled concrete. If it is full, the driver only needs to turn on the switch below the box to unload the concrete.
It is a good way to install leak-proof boxes for mixing vehicles. The person in charge should also strengthen the education and training of drivers, improve the civilized driving quality of drivers, consciously reduce the spill of mixing vehicles, and take responsibility for purifying the highway environment.
What should be done if leakage occurs along the operation of the feeding mixer? The above problem content can be used as a reference to see, the specific situation to specific analysis, this point needs to understand. For more information, please visit www.zkzsljbc.com.