Small mixers are widely used in municipal projects, small water conservancy projects, rural housing construction, housing decoration, power and communication projects, harsh mountain environment, leisure agriculture, soil loosening, weeding, etc. So why does the maintenance of small mixer trucks save fuel consumption?
The maintenance of a small mixer can save fuel consumption. The fuel saving adjustment and maintenance of the mixer affect the performance of the diesel engine. The friction resistance when driving the mixer.
According to statistics, the fuel consumption of diesel engines with poor maintenance will increase by 10%~20%. The owner should regularly go to the car repair factory for routine maintenance, such as checking the tire pressure, four-wheel positioning, adjusting the gap between the brake system friction plate and the brake drum, oiling each lubrication point of the mixer chassis, changing the oil on schedule, and checking the filter. In addition, the oil in the manual refers to specific models, and the oil with low viscosity is selected, because the higher the viscosity is, the greater the friction is, which increases the oil consumption.
Avoid long idling and high speed of diesel engine of small mixer: the fuel consumption of diesel engine at idle speed is much higher than that at normal driving, so the concrete mixer will not be started for a long time, so it is better to shut down and stop the fire properly; During cold start, warm the car for no more than 1 minute, and keep driving at low gear for several minutes.
Try to avoid sudden braking and sudden starting of small mixers, and try to drive in a soft, smooth and stable way to save fuel. At the starting stage, try to avoid stepping on the accelerator. The correct way is to accelerate smoothly and steadily. After reaching a certain speed rate, try to keep driving at a uniform speed.
When driving on a crowded road section, you should also see the road conditions ahead to avoid sudden braking. This not only saves fuel, but also extends the service life of the mixer. Maintain the driving speed rate of small mixer.
Each vehicle has its own speed of economic development, and maintenance is fuel saving near the speed of economic development. Generally speaking, when the vehicle runs at high speed, the friction resistance of the concrete mixer is greatly increased (mainly the air resistance). According to statistics, when the speed increase rate reaches 110 to 120 kilometers per hour, it will increase by 25%.
It is very reasonable to save fuel consumption by maintaining a small mixer. Do you have a new understanding after reading the above explanation? Come to our website if you need http://www.zkzsljbc.com Consult!