自上料搅拌车厂家

全国咨询热线

400-879-1999

点击拨打服务热线:400-879-1999
你所在位置: 首页 >> 新闻中心 > 行业资讯 >

行业资讯

搅拌机械液压油的使用特点及介绍

作者:http://www.zkzsljbc.com 时间:2021-05-20

(1)液压油过滤器:在搅拌机械作业后,要及时检查、清洁搅拌机械的液压油过滤器。发现液压油过滤器损坏要及时更换,避免形成更大的硬件损耗。搅拌机械在注油的过程中,需要120目滤网的过滤器,进行过滤处理。搅拌机械经过长时间的使用后,逐渐出现润滑性降低、堵塞、空蚀等问题,必须要及时检查、注入、更换液压油。
(1) Hydraulic oil filter: after the operation of the mixing machine, the hydraulic oil filter of the mixing machine should be checked and cleaned in time. If the hydraulic oil filter is damaged, it should be replaced in time to avoid greater hardware loss. In the process of oil injection, a 120 mesh filter is needed for filtering. After a long time of use, the mixing machine gradually appears problems such as reduced lubricity, blockage, cavitation and so on. It is necessary to check, inject and replace the hydraulic oil in time.
(2)液压油黏度:当液压系统瘫痪、不工作等故障出现,要及时的调整液压油的黏度。黏度过高将损耗液压油液的动能;黏度过低将增加泄漏液压油液、温度升高。
(2) Hydraulic oil viscosity: when the hydraulic system is paralyzed, does not work and other failures occur, to timely adjust the viscosity of the hydraulic oil. If the viscosity is too high, the kinetic energy of the hydraulic fluid will be lost; If the viscosity is too low, the leakage of hydraulic fluid will increase and the temperature will increase.
自动上料搅拌车
(3)油箱的液压油应该处于正常的液面位置,确保回油管以及吸油过滤器处于液面位置以下的位置,防止在油路回油过程中有空气进入到油泵内。吸油滤清器应该定期的进行检查,如果出现了堵塞的现象应该及时进行清理,防止发生空蚀。
(3) The hydraulic oil in the oil tank should be at the normal liquid level to ensure that the oil return pipe and oil suction filter are below the liquid level to prevent air from entering the oil pump during the oil return process. The oil suction filter should be checked regularly. If it is blocked, it should be cleaned in time to prevent cavitation.
搅拌机械是路桥施工作业中,重要的工程机械。对于建设施工领域的应用十分广泛,对保证建设安全、质量、进度有极其重要的影响。及时检查路桥施工中的搅拌机械运行状况,查找故障、问题的根源进行解决,才能预防问题的发生,避免在设备维护、维修等方面的资金投入。建立完整的搅拌机械设备检查管理模式,定时保养搅拌机械,杜绝问题的萌生。
Mixing machinery is an important engineering machinery in road and bridge construction. It is widely used in the field of construction, and has an extremely important impact on ensuring the construction safety, quality and progress. In order to prevent the occurrence of problems and avoid capital investment in equipment maintenance, repair and other aspects, it is necessary to check the operation status of mixing machinery in road and bridge construction in time and find out the root causes of faults and problems. Establish a complete mixing machinery and equipment inspection management mode, regular maintenance of mixing machinery, to eliminate the emergence of problems.
根据不同的故障情况,选择合理、有效的维护方法,才能让搅拌机械运转投人至路桥施工作业中,同时也提高了搅拌机械的使用寿命,减低安全风险、加大施工进程.确保施工质量、避免不必要的资金支出。
According to different fault conditions, reasonable and effective maintenance methods can be selected so that the mixing machinery can be put into the road and bridge construction operation. At the same time, the service life of the mixing machinery can be improved, the safety risk can be reduced, the construction process can be increased, the construction quality can be ensured, and unnecessary capital expenditure can be avoided.
今天的自动上料搅拌车精彩内容就给大家分享到这了,更多的精彩内容请点击我们的网站http://www.zkzsljbc.com进行关注留言,后续会有更多的精彩内容为您呈现.
Today's auto feeding mixer wonderful content to share with you, more wonderful content please click on our website http://www.zkzsljbc.com Follow the message, there will be more wonderful content for you
上一篇:自动上料搅拌车操作前需要提前培训吗?
下一篇:自上料搅拌车对于工程施工流程

TAG:自上料搅拌车,自动上料搅拌车, 全自动搅拌车,小型搅拌车

新闻中心
联系我们
  • 公司:莱州聚峰机械有限公司
  • 热线:400-879-1999
  • 地址:山东省莱州市206国道与308省道交叉口东南50米

截屏,微信识别二维码

微信号:1234567

点击微信号复制,添加好友

 打开微信