1、 Ensure that there is enough water and water reducing agent in the tank of concrete mixer truck
Generally, the materials used in the mixer are relatively dry, so it is impossible to mix the materials normally without adding water. Therefore, the role of water reducing agent and water in equipment operation is quite important.
2、 Confirm that the mixing tank from the loading concrete mixer is in the stop state
When the engine is started, if the mixing tank is in the state of high-speed rotation, it will damage the reducer of the equipment and affect the normal use of the equipment.
3、 Check the parts and accessories of the equipment, and eliminate the problems in time
1. Before ignition, check the engine oil, antifreeze, lubricating oil and cooling water, and add them again if they are insufficient.
2. After the car starts, let the jar rotate at a low speed. Check the tire pressure around the car to see if there is a flat tire. Then use a screwdriver to remove the stones in the tire seams.
3. Check the light again, especially the waist lamp, and make sure to shine on the edge of the tire. The construction site will often pile up reinforcement and other things, and the sidewall is the weakest.
4. Clean the rear-view mirror and window glass on both sides with dishcloth. The road conditions on the construction site are complex and the light is not good. The line of sight must be guaranteed first!
Generally, the operating environment of self loading concrete mixer is not very good, which also requires us to have a detailed understanding of the equipment before operation. After ensuring that the equipment does not have any fault problems, it can be operated and used normally, so as to avoid all kinds of bad problems that may exist in the operation.